Range Rover Classic is the name given by the automobile manufacturer Land Rover to first generation Range Rovers built from 1994 to 1996, a time when the then new second generation was also built; however, this term is also in both popular and enthusiast usage to describe the same vehicle produced from 1970 to 1996.
[] Design
While it was designed under the Rover aegis as an upmarket version of the Land Rover of its time, the Range Rover was a radical break from its nominal "little brother", sharing almost nothing in either components or design. The chassis was suspended by coil springs, and because of the Range Rover's hefty weight, hydraulic disc brakes were fitted on all four wheels, rather than the then-common drum brakes.
Transmission-wise the Range Rover used permanent four-wheel drive, rather than the switchable rear-wheel/four-wheel drive on the Series vehicles (this became the norm for all Land Rover vehicles), and had a lever for switching ratios on the transfer box (called "high/low box") for off-road use. Overdrive for use with third and fourth gears was an option on the early four-speed manual boxes. The engine was originally a detuned (135 bhp) version of the legendary Buick-derived 3528 cc Rover V8 engine.
Like all Land Rover vehicles, most of the Range Rover's bodywork skin is constructed from lightweight aluminium, save for the two-section rear tailgate, and the bonnet on earlier models.
[] History
[] Early history
Rover had been experimenting with producing a "big brother" to the Land Rover as far back as the 1950s, with the Rover P4-based two-wheel-drive Road Rover project. This was shelved in 1958, and the idea laid dormant until 1966, when engineers Spencer King and Gordon Bashford set to work on a new luxury off-roader.
In 1967, the first Range Rover prototype was built, with the classic Range Rover shape clearly discernible but for a different front grille and headlight configuration. The design of the Range Rover was finalised in 1969. Twenty-six Velar engineering development vehicles were built between 1969 and 1970 and were road registered with the number plates YVB 151H through YVB 177H.
It is commonly thought that "VELAR" is an acronym for Vee Eight Land Rover, however the name is derived from the Italian 'Velare' meaning to veil or to cover. Range Rover development engineer, Geof Miller, used the name as a decoy for registering pre-production Range Rovers. The Velar company was registered in London and produced forty pre-production vehicles that were built between 1967 and 1970.
[] 1970-1980
In June 1970, the Range Rover was introduced to the public, to much critical acclaim. It appeared that Rover had succeeded in their goal of a car equally capable both on and off road -- arguably, better than any four-wheel drive vehicle of its era in both environments. Road performance (a top speed of 95 mph and acceleration from a standstill to 60mph in less than 15 seconds) was as good or better than many family saloon cars of its era, and off-road performance was staggering owing to its long suspension travel and high ground clearance. Notable off-road feats were winning the 4-wheel drive class in the first Paris-Dakar Rally in 1979 (a feat repeated in 1981), and being two of the first vehicles (along with a Series IIA) to traverse both American continents north-to-south through the Darién Gap from 1971–1972.
Little changed in the decade after its introduction, save for the addition of power steering in 1973 and very minor cosmetic changes such as moving the side mirrors from the wings to the front doors. In 1980, the suspension was changed to reduce ground clearance by 20 mm. While such a change might have been noticeable in heavy off-road use, this served to reduce the colossal body roll that early Range Rovers suffered.
From 1979 onwards, Land Rover collaborated with Perkins on Project Iceberg, an endeavour to develop a diesel version of the Range Rover's 3.5-litre V8 engine. Both naturally-aspirated and turbocharged versions were built, but in both cases problems were found with the all-alloy engine blocks failing under the much greater pressures involved in diesel operation. The project was discarded in 1983 and the decision to import VM diesel engines from Italy was taken instead, which were sold under the 'Turbo D' name.
[] 1981-1985
One of the first significant changes came in 1981, with the introduction of the four-door body. Until then, Range Rovers only had two doors, which made access to the rear seats rather difficult. These doors were also extremely large and heavy -- with people of lighter build, they require a whole-hearted "slam" to close properly, and removal is usually considered to be at least a two-man job. The four-door version solved both these problems, and was received well by the public; the four-door became popular enough that the two-door was discontinued in the United Kingdom in 1984, although the two-door continued to be produced to the end, mainly for the French market.[8]
In 1982, the Range Rover was given automatic transmission as an optional extra (initially a 3-speed Chrysler box, but uprated to a 4-speed ZF in 1985). The other major transmission upgrade in the Range Rover's lifetime was the switch from the four-speed LT95 manual gearbox to the five-speed LT77 in 1983.
[] 1986-1991
The biggest cosmetic change came in 1986, with a revamped front end. This included a more pedestrian-friendly plastic grille with horizontal slats and front skirts with two driving lights. In the same year, Lucas electronic fuel injection was introduced, improving both performance and fuel economy. Some export markets retained carburettors, however the original Zenith/Stromberg manufactured units were replaced by Skinners Union (SU)-manufactured items.
1986 also saw the introduction of the Range Rover to the United States, when Land Rover set up their first headquarters in Lanham, Maryland in 1986 (the first US-specification Range Rovers were sold in 1987). Range Rovers had already proven themselves popular with Americans in the grey market. A more efficient 2.4 litre (2393 cc) VM diesel engine was made available as an option for the heavily-taxed European market.
In 1989 (the same year in which the Land Rover Discovery, heavily derived from the Range Rover, was introduced) the 3.5 litre engine was bored out to a displacement of 3.9 litres (3947 cc) for the 1990 model year, and the interior was revamped. The Range Rover gained anti-roll bars (rather belatedly solving the problem of body roll that had plagued Range Rovers for two decades, at the expense of off-road capability) and the VM engine's displacement increased to 2.5 litres (2499 cc).
[] 1992-1996
The Range Rover lineup underwent its final revamp in 1992, when the venerable Rover engine was bored out to 4.2 litres (4197 cc), coinciding with the introduction of the luxurious LSE model (a lengthened Range Rover with a wheelbase of 108 inches (2743 mm)). LSE models in the US all had the usual 100" wheelbase and the 3.9L engine, while the UK models featured the 108" wheelbase with the 4.2L engine. The 108" wheelbase and 4.2L engine were introduced to the US and were given the name "County LWB". Land Rover replaced the VM engine with their own 200TDi turbocharged diesel lump and introduced air suspension on high-end models.
The death knell for the classic Range Rover design sounded in 1994 with the introduction of a completely new Range Rover (nicknamed P38A). However, production of the old-shape Range Rovers continued under the name "Range Rover Classic" (which the public have adopted to refer to all pre-P38A Range Rovers).
In 1996, the final Classic rolled off the assembly line at Solihull, 26 years after the first went on sale, still looking very much like its 1970 ancestor.
[] Special Range Rovers
The "In Vogue", a more luxurious special edition of the Range Rover, was produced in 1983. This proved so popular that it went into full-fledged production as the Vogue.
For a time, Carmichael produced a six-wheeled fire engine based on a two-door Range Rover. These were lengthened considerably and fitted with an extra undriven axle to bear the extra weight. Carmichael also converted the chassis for several four-door Range Rovers of this type by Land Rover for the British Ministry of Defence.
In 1990 a special 20th aniversary edition of the Range Rover was created - the Range Rover CSK (CSK being the initials of Charles Spencer King). Only 200 CSKs were ever made, all of which were two-door vehicles, and are now highly sought after vehicles. For a while, Spen King owned number 200, but this has since been sold on
|
